메뉴 건너뛰기

International Journal 2024.01: Ui Seok Lee, Dae Bo Sim, JI Hyo Lee and Bo Hyun Kim. 2024. "Fabrication of Micro Carbon Mold for Glass-Based MIcro Hole Array" Micromachines 15(2), 194.

DBSim 2024.03.21 20:39 조회 수 : 1270

2024.01: Ui Seok Lee, Dae Bo Sim, JI Hyo Lee and Bo Hyun Kim. 2024. "Fabrication of Micro Carbon Mold for Glass-Based MIcro Hole Array" Micromachines 15(2), 194.

 

 https://doi.org/10.3390/mi15020194

A section of Micromachines (ISSN 2072-666X).

Fig.14.png

 

이 게시물을
목록
번호 제목 날짜 아이디
133 2024.11: J. Y. Kim, J. H. Lee, B. H. Kim Micro Holes Machining of Glassy Carbon Using EDM, 2024년도 한국정밀공학회 추계학술대회 file 2024.11.18 JYKim
132 2024.11: B. H. Kim, W. C. Park, S. J. Yu, H. J. Jeon, J. Y. Kim Surface Roughness Prediction System Using Artifical Intelligence in Milling Processes, 2024년도 한국정밀공학회 추계학술대회 file 2024.11.18 JYKim
131 2024.11 : Ji Hyo Lee, Jae Yeon Kim, Dae Bo Sim, & Bo Hyun Kim (2024). Prediction of Machining Conditions from EDMed Surface Using CNN. Journal of the Korean Society for Precision Engineering, 41(11), 865-873, 10.7736/JKSPE.024.080 file 2024.11.18 JYKim
130 2024.08: HJ Choi, Asad Ullah, MJ Jang, US Lee, MC Shin, SH An, DS Kim, BH Kim and GM Kim. 2024. "Microneedle patch casting using a micromachined carbon master for enhanced drug delivery" Scientific Reports. 14(1). 19228 file 2024.10.08 JYKim
129 2024.07: Min Chul Shin, Bo Hyun Kim and Gyu Man Kim. 2024. "Development of Micro Electrical Discharge Machine and Micro-hole Machining Using Multiple Micro Electrodes" Int. J. Precis. Manuf.-Smart Tech. 2(2) 101-108 file 2024.10.16 JYKim
128 2024.07: J. H. Lee, J. Y. Kim, B. H. Kim Study on ductile mode machining of glass through critical depth of cut, 2024년도 한국생산제조학회 춘계학술대회 file 2024.10.29 jihyo
127 2024.05: J. Y. Kim, J. H. Lee, D. B. Sim, B. H. Kim Ductile Mode Cutting of Glassy Carbon Using PCD Tool, 한국정밀공학회 2024년도 춘계학술대회 file 2024.05.14 JYKim
126 2024.05: J. H. Lee, J. Y. Kim, D. B. Sim, Y. H. Cho, B. H. Kim Ductile-Brittle Transition Analysis for Micro Ductile Mode Machining of Glass, 한국정밀공학회 2024년도 춘계학술대회 file 2024.05.14 jihyo
125 2024.02: Lee J. H, Yang, C. Y., Kim, B. H., Machining Characteristics of Micro EDM of Silicon Carbide, Journal of the Korean Society for Precision Engineering, Vol.41, No. 2, pp. 131-137, 2024 file 2024.03.22 DaeboSim
124 2024.02: Kim M. K, Yang C. Y, Sim D. B, Lee J. H, Kim B. H., Study on Micro Grooving of Tungsten Carbide Using Disk Tool, Journal of the Korean Society for Precision Engineering, Vol.41, No. 2, pp. 123-129, 2024 file 2024.03.06 administrator
» 2024.01: Ui Seok Lee, Dae Bo Sim, JI Hyo Lee and Bo Hyun Kim. 2024. "Fabrication of Micro Carbon Mold for Glass-Based MIcro Hole Array" Micromachines 15(2), 194. file 2024.03.21 DaeboSim
122 2023.11: S. M. Moon, J. H. Lee, D. B. Sim, B. H. Kim, A study of indentation machining for micro mold, 한국정밀공학회 2023년도 추계학술대회 file 2023.12.04 DaeboSim
121 2023.11: J. H. Lee, D. B. Sim, B. H. Kim, Prediction of Discharge Conditions from EDMed Surface Using CNN file 2023.11.30 jihyo
120 2023.11: D. B. Sim, J. H. Lee, B. H. Kim, Micro drilling of silicon carbide, 한국정밀공학회 2023년도 추계학술대회 file 2023.12.04 eoqhek
119 2023.07: Effect of Tool Surface on Micro Grinding of Cemented Carbide, Dae Bo Sim, Ji Hyo Lee, Bo Hyun Kim, International Conference on Precision Engineering and Sustainable Manufacturing (PRESM 2023) file 2023.09.18 eoqhek
118 2023.07: Effect of Surface Roughness of Tools on the Surface Quality in the Micro Grinding of Cemented Carbide, Dae Bo Sim, Ji Hyo Lee, Bo Hyun Kim, International Symposium on Micro & Nano Manufacturing (ISMNM 2023) file 2023.09.18 eoqhek
117 2023.05: J. H. Lee, D. B. Sim, M. S. Park, B. H. Kim, Micro Mechanical Machining of 3D Printed Ceramic Materials, 한국정밀공학회 2023년도 춘계학술대회 file 2023.05.16 jihyo
116 2023.05: D. B. Sim, J. H. Lee, J. G. Ok, B. H. Kim, Fabrication of Cemented Carbide Mold Using Micro Mechanical Machining, 한국정밀공학회 2023년도 춘계학술대회 file 2023.09.18 eoqhek
115 2022.12: Lee, Pyeong An, Ui Seok Lee, Dae Bo Sim, and Bo Hyun Kim. 2023. "Microfluidic Chip Fabrication of Fused Silica Using Microgrinding" Micromachines 14, no. 1: 96. file 2023.01.03 administrator
114 2022.12: Fabrication of Micro Pin Array Using Eccentric Tools, Ui Seok LEE, Chan Young Yang, Ju Hyeon Lee, Dae Bo Sim, Bo Hyun Kim, International Conference on Precision Engineering (ICPE2022) file 2023.02.12 eoqhek
113 2022.12: D. B. Sim, U. S. Lee, J. H. Lee, H. Y. Kim, B. H. Kim, Fabrication of Micro Drilling and Endmill Tool for Cemented Carbide Machining, 한국기계가공학회 2022년도 추계학술대회 file 2023.02.12 eoqhek
112 2022.12: D. B. Sim, B. H. Kim, Study on the EDMed surface of PCD micro tools in the machining of cemented carbide, 한국생산제조학회 2022년도 추계학술대회, 초경합금 가공에서 PCD 미세 공구의 방전면에 대한 연구 file 2023.02.12 eoqhek
111 2022.11: Pyeong An Lee and Bo Hyun Kim, A Study of Microdrilling of Fused Silica Using EDMed PCD Tools, Appl. Sci. 2022, 12, 11166. file 2022.11.23 administrator
110 2022.11: Micro mechanical machining of cemented carbide using PCD tools, Dae Bo Sim, Chan Young Yang, Ju Hyeon Lee, Ho Yoon Kim, Bo Hyun Kim, International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2022) file 2023.02.12 eoqhek
109 2022.10: 폴리머 마이크로 니들 패치의 기계적 강성 분석, 한국정밀공학회 2022년도 추계학술대회 논문집, 2022.10 415 - 415 (1page) 2023.03.21 administrator
108 2022.10: 미세절삭가공을 이용한 미세유체칩 제작 및 액적 생성, 한국정밀공학회 2022년도 추계학술대회 논문집, 2022.10 153 - 153 (1page) 2023.03.21 administrator
107 2022.10: Sim, D. B., Yang, C. Y., Kim, B. H., Machining of V-Shaped Microchannel on Cemented Carbide Using PCD Tools, Journal of the Korean Society for Precision Engineering, Vol.39, No. 10, pp. 747-752, 2022 file 2022.11.07 eoqhek
106 2022.10: H. Y. Kim, D. B. Sim, C. Y. Yang, J. H. Lee, B. H. Kim, Effect of Tool Shape on Tool Wear in Micro Grinding of Alumina, 한국정밀공학회 2022년도 추계학술대회 논문집, p149, 산화알루미늄의 미세 연삭에서 공구 형상이 공구 마모에 미치는 영향 file 2022.10.28 hoyoon2877
105 2022.10: Glass Micro-cutting Process Orthogonal Cutting Simulation Using Smooth Particle Hydrodynamics, SPH 를 이용한 유리 마이크로 절삭 공정의 직교 절삭 시뮬레이션, 한국정밀공학회 2022년도 추계학술대회 논문집, 2022.10 154 - 154 (1page) 2023.03.21 administrator
104 2022.10: Cho, Younghak; Hwang, Jihong; Park, Min-Soo; Kim, Bo Hyun, Fabrication Methods for Microscale 3D Structures on Silicon Carbide, International Journal of Precision Engineering and Manufacturing, 23, 1477–1502, 2022) file 2023.02.11 administrator
103 2022.07: 고종횡비 미세채널에서의 나노입자 집중 및 분리, 2022 한국생산제조학회 춘계학술대회 논문집, 2022.07 248 - 248 (1page) 2023.03.21 administrator
102 2022.07: Micro Machining of 3D Printed Steel Using PCD Pencil Grinding Tools, Chan Young Yang, Dae Bo Sim, Joon Phil Choi, Segon Heo, Min-Kyo Jung, Bo Hyun Kim, (PRESM2022) file 2023.02.12 eoqhek
101 2022.07: Effect of Cutting Depth on Surface Crack in Micro Machining of SiC, Ju Hyeon Lee, Bo Hyun Kim, Jihong Hwang, International Conference on Precision Engineering and Sustainable Manufacturing (PRESM2022) file 2023.02.12 eoqhek
100 2022.05: 기계적 가공을 이용한 초경합금의 V자형 미세 채널 가공, 대한기계학회 생산 및 설계공학 부문 2022년도 춘계학술대회, 2022.05 85 - 85 (1page) 2023.03.21 administrator
99 2022.05: 격자무늬 흑연전극을 이용한 마이크로 방전가공 특성 연구, 한국정밀공학회 2022년도 춘계학술대회 논문집, 2022.05 173 - 173 (1page) 2023.03.21 administrator
98 2022.05: D. B. Sim, C. Y. Yang, J. H. Lee, H. Y. Kim, H. N. Ahn, B. H. Kim, A Fabrication of Micro Tools for V-shape Groove Machining, 2022 한국정밀공학회 2022년도 춘계학술대회 논문집, V자형 미세 홈 가공을 위한 마이크로 공구 제작 file 2023.01.09 eoqhek
97 2022.05: C. Y. Yang, D. B. Sim, B. H. Kim, A Study of Micro Turning of Tungsten Carbide Using Polycrystalline Diamond, 2022 한국정밀공학회 춘계학술대회 file 2023.01.09 eoqhek
96 2021.12: C. Y. Yang, M. K. Kim, J. H. Lee, B. H. Kim, Micromachining of tungsten carbide and ceramics file 2023.01.09 eoqhek
95 2021.11: J. H. Lee, C. Y. Yang, B. H. Kim, Micro EDM of Silicon Carbide file 2023.01.09 eoqhek
94 2021.08: Na, Y.; Lee, U.S.; Kim, B.H. Experimental Study on Micro-Grinding of Ceramics for Micro-Structuring. Appl. Sci. 2021, 11, 8119. file 2021.09.30 ssborry
쓰기 태그