|
125 |
2005: B. H. Kim, S. H. Ryu, D. K. Choi, C. N. Chu, Micro electrochemical milling, Journal of Micromechanics and Microengineering, Vol.15, No.1, pp. 124-129, 2005
 | 2012.12.17 | admin |
|
124 |
2004: B. H. Kim, et al., "Micro Electrochemical Machining of Stainless Steel”, International Conference on Electrical Engineering 2004 (ICEE 2004), Japan, 2004
| 2012.12.28 | admin |
|
123 |
2005: B. H. Kim, C. W. Na, Y. S. Lee, D. K. Choi, C. N. Chu, Micro Electrochemical Machining of 3D Micro Structure Using Dilute Sulfuric Acid, CIRP Annals - Manufacturing Technology, Vol.54, No.1, pp. 191-194, 2005
| 2012.12.31 | t310 |
|
122 |
2004: “Micro Electrochemical Machining of Stainless Steel”, International Conference on Electrical Engineering 2004 (ICEE 2004), Japan, 2004
| 2012.12.31 | t310 |
|
121 |
2011: "Micro EDM of tool electrode using wear ratio", Proceeding of Conference of Korean society for precision engineering 2011
| 2013.01.02 | t310 |
|
120 |
2011 "Micro EDM of tool electrodes using wear ratio", International conference on abvanced science and technology for materials, manufacturing and measurement 2011, Korea, 2011
| 2013.01.02 | t310 |
|
119 |
2011 "Micro tool fabrication by plate electrode", International conference of asian society for precision engineering and nanotechnology, Hong Kong, 2011
| 2013.01.02 | t310 |
|
118 |
2012: "미세 밀링 가공의 원격 조정 및 감시 시스템", The Korean Society of Mechanical Engineers, Korea, 2012
| 2013.01.02 | t310 |
|
117 |
2012 "Fabrication of micro patterns using poly crystalline diamond shaping tools", International Symposium on Green Manufacturing and Applications, Korea, 2012
| 2013.01.02 | t310 |
|
116 |
2006: B. H. Kim, B. J. Park, C. N. Chu, Fabrication of multiple electrodes by reverse EDM and the application in micro ECM, Journal of Micromechanics and Microengineering, Vol.16, No.4, pp. 843-850, 2006
| 2013.01.03 | t310 |
|
115 |
2006: B. J. Park, B. H. Kim, C. N. Chu , The Effects of Tool Electrode Size on Characteristics of Micro Electrochemical Machining, CIRP Annals - Manufacturing Technology, Vol.55, No.1, pp. 197-200, 2006
| 2013.01.03 | t310 |
|
114 |
2007: D. K. Chung, B. H. Kim, Chong Nam Chu, Micro Electrical Discharge Milling Using Deionized Water as Dielectric Fluid, Journal of Micromechanics and Microengineering, Vol.17, No.5, pp. 867-874, 2007
| 2013.01.03 | t310 |
|
113 |
2007: J. G. Ok, B. H. Kim, W. Y. Sung, C. N. Chu, Y. H. Kim, Uniformity enhancement of carbon nanofiber emitters via Electrical Discharge Machining, Applied Physics Letters, Vol.90, No.3, pp. 33117, 2007
| 2013.01.03 | t310 |
|
112 |
2007: B. H. Kim, J. G. Ok, Y. H. Kim and C. N. Chu, Electrical Discharge Machining of Carbon Nanofiber for Uniform Field Emission, CIRP Annals - Manufacturing Technology, Vol.56, No.1, pp. 233-236, 2007
| 2013.01.03 | t310 |
|
111 |
2008: J. G. Ok, B. H. Kim, et al., Electrical discharge machining of carbon nanomaterials in air: machining characteristics and the advanced field emission applications, J. of Micromech. Microeng., Vol.18, No.2, p. 025007, 2008
| 2013.01.03 | t310 |
|
110 |
2008: P. J. Cho, B. H. Kim, D. K. Choi, C. N. Chu, Characteristics of MEDM for Micro-Hole with respect to Circuit Elements, Journal of Mechanical Science and Technology, Vol.22, No.2, pp. 300-307, 2008
| 2013.01.03 | t310 |
|
109 |
2008: H. S. Shin, B. H. Kim, C. N. Chu, Analysis of the side gap resulting from micro electrochemical machining with a tungsten wire and ultrashort voltage pulses, Journal of Micromechanics and Microengineering, Vol.18, No.7, pp. 0960-1317, 2008
| 2013.01.03 | t310 |
|
108 |
2009: D. K. Chung, H. S. Shin, B. H. Kim, M. S. Park, C. N. Chu, Surface finishing of micro-EDM holes using deionized water, Journal of Micromechanics and Microengineering, Vol.19, No.4, pp. 045025(7pp), 2009
| 2013.01.03 | t310 |
|
107 |
2009: C. H. Jo, B. H. Kim, C. N. Chu, Micro Electrochemical Machining for Complex Internal Micro Features, CIRP Annals - Manufacturing Technology, Vol. 58, No. 1, pp. 181-184, 2009
| 2013.01.03 | t310 |
|
106 |
2009: X. D. Cao, B. H. Kim, C. N. Chu, Micro-structuring of glass with features less than 100 μm by electrochemical discharge machining, Precision Engineering, Vol.33, No.44, pp. 459-465, 2009
| 2013.01.03 | t310 |
|
105 |
2010: S. Kim, B. H. Kim, D. K. Chung, H. S. Shin, C. N. Chu, Hybrid micromachining using a nanosecond pulsed laser and micro EDM, Journal of Micromechanics and Microengineering, Vol.20, No.1, pp. 15037(8pp), 2010
| 2013.01.03 | t310 |
|
104 |
2010: H. S. Shin, D. K. Chung, M. S. Park, B. H. Kim, C. N. Chu, Electrochemical Etching of Stainless Steel Through Laser Masking, Journal of Micromechanics and Microengineering, Vol.20, No.5, pp. 55030, 2010
| 2013.01.03 | t310 |
|
103 |
2010: Kim, B. H, et al., Fabrication of Micro Probe-Type Electrodes for Microelectro-Chemical Machining Using Microfabrication, Int. J. Modern Physics B, Vol.24, No.15-16, pp. 2639-2644, 2010
| 2013.01.03 | t310 |
|
102 |
2010: J. W. Byun, H. S. Shin, M. H. Kwon, B. H. Kim, C. N. Chu, Surface Texturing by Micro ECM for Friction Reduction, International Journal of Precision Engineering and Manufacturing, Vol.11, No.5, pp. 747-753, 2010
| 2013.01.03 | t310 |
|
101 |
2011: D. K. Chung, H. S. Shin, M. S. Park, B. H. Kim, C. N. Chu, Recent Researches in Micro Electrical Machining, International Journal of Precision Engineering and Manufacturing, Vol.12, No.2, pp. 371-380, 2011
| 2013.01.03 | t310 |
|
100 |
2011: D. K. Chung, H. S. Shin, B. H. Kim, C. N. Chu, High Frequency Micro Wire EDM for Electrolytic Corrosion Prevention, International Journal of Precision Engineering and Manufacturing, Vol.12, No.6, pp. 1125-1128, 2011
| 2013.01.03 | t310 |
|
99 |
2012: B. H. Kim, et al., Wire Electrical Discharge Machining of Carbon Nanofiber Mats for Field Emission, International Journal of Precision Engineering and Manufacturing, Vol.13, No.4, pp. 593-599, 2012
| 2013.01.03 | t310 |
|
98 |
2013.01: X. D. Cao, B. H. Kim,C. N. Chu, Hybrid Micromachining of Glass Using ECDM and Micro Grinding, International Journal of Precision Engineering and Manufacturing, Vol. 14, No. 1, pp. 5-10, 2013
| 2013.01.03 | t310 |
|
97 |
2013.04: Choi, S. H., Kim, B. H., Shin, H. S., Chung, D. K. and Chu, C. N., "Analysis of the Electrochemical Behaviors of Wc–Co Alloy for Micro ECM," Journal of Materials Processing Technology, Vol. 213, No. 4, pp. 621-630, 2013
| 2013.04.18 | admin |
|
96 |
2013.04: Cho, Y. H., Lee, K. Y., Moon, I. Y., Kim, B. H., Park, K., Facile Fabrication of Superhydrophobic Poly(Methyl Methacrylate) Substrates using Ultrasonic Imprinting, Journal of Micromechanics and Microengineering, Vol. 23, 055019, 201
| 2013.04.18 | admin |
|
95 |
2013, "PCD 공구를 이용한 티타늄 합금의 미세 가공", 한국정밀공학회지, Vol. 30, No. 3, pp. 284-291, 2013
| 2013.04.18 | admin |
|
94 |
2012: Kim, S. K., Moon, I. Y., Lee, P. A., Kim, B. H., "Micro Tool Fabrication of Polycrystalline Cubic Boron Nitride(PCBN) and its Application," Proceeding of Fall Conference of KSPE, 2012
| 2013.04.18 | admin |
|
93 |
2015.04: Jung, S. M. Kim, B. H.,Lee, P. Y., Polishing of Quartz by CO2 laser, KSMTE Annual Spring Conference, pp. 226, 2015
| 2015.06.01 | admin |
|
92 |
2014.10 Experimental observation of the hard turning with the micro-patterned insert
| 2015.06.02 | admin |
|
91 |
2014.10: Micro/nano-hybrid lens for enhancing light extraction using micromilling and anodic aluminum oxide (AAO)
| 2015.06.02 | admin |
|
90 |
2016.03: D. M. Kim, I. E. Lee, S. K. Kim, B. H. Kim, H. W. Park, "Influence of a micropatterned insert on characteristics of the tool-workpiece interface in a hard turning process", Journal of Materials Processing Technology, Vol. 229, 160-
| 2015.10.07 | prema |
|
89 |
2015.06: D. M. Kim, Vivek Bajpai, B. H. Kim, H. W. Park, "Finite element modeling of hard turning process via a micro-textured tool", International Journal of Advanced Manufacturing Technology, Vol.78, Issue 9, pp 1393-1405, 2015
| 2015.10.07 | prema |
|
88 |
2015.01: Khac-Ha Nguyen, P. A. Lee, B. H. Kim, "Experimental investigation of ECDM for fabricating micro structures of quartz", International Journal of Precision Engineering and Manufacturing, Vol. 16, Issue 1, pp 5-12, 2015
| 2015.10.07 | prema |
|
87 |
2015:"Micro structuring of glass by mechanical processes", International Symposium on Green Manufacturing and Applications Program and Proceedings, China, 2015
| 2015.10.07 | prema |
|
86 |
2015.12: P. A. Lee, Y. H. Kim, B. H. Kim, "Effect of Low Frequency Vibration on Micro EDM Drilling", International Journal of Precision Engineering and Manufacturing, Vol. 16, No. 13, pp. 2617-2622
| 2015.10.10 | prema |
