40 |
2008: H. S. Shin, B. H. Kim, C. N. Chu, Analysis of the side gap resulting from micro electrochemical machining with a tungsten wire and ultrashort voltage pulses, Journal of Micromechanics and Microengineering, Vol.18, No.7, pp. 0960-1317, 2008
| 2013.01.03 | t310 |
39 |
2009: X. D. Cao, B. H. Kim, C. N. Chu, Micro-structuring of glass with features less than 100 μm by electrochemical discharge machining, Precision Engineering, Vol.33, No.44, pp. 459-465, 2009
| 2013.01.03 | t310 |
38 |
2019.12: Woo Kyun Kim, Dalei Xi, Bo Hyun Kim, Nanoscale indentation and scratching tests of single crystal sapphire using molecular dynamics simulation, Computational Materials Science, Vol. 170, 109105
| 2019.09.10 | bhkim |
37 |
2021.02: Rapid manufacturing of large diameter Cu micropillars by micro-electrical discharge machining and focused ion beam
| 2021.03.10 | lus223 |
36 |
2019.03. Jihong Hwang, Young Hak Cho, Min Soo Park, Bo Hyun Kim, Microchannel Fabrication on Glass Materials for Microfluidic Devices, International Journal of Precision Engineering and Manufacturing, Vol. 20, No. 3, pp. 479-495, 2019
| 2019.03.25 | bhkim |
35 |
2022.12: Lee, Pyeong An, Ui Seok Lee, Dae Bo Sim, and Bo Hyun Kim. 2023. "Microfluidic Chip Fabrication of Fused Silica Using Microgrinding" Micromachines 14, no. 1: 96.
| 2023.01.03 | administrator |
34 |
2016.03: D. M. Kim, I. E. Lee, S. K. Kim, B. H. Kim, H. W. Park, "Influence of a micropatterned insert on characteristics of the tool-workpiece interface in a hard turning process", Journal of Materials Processing Technology, Vol. 229, 160-
| 2015.10.07 | prema |
33 |
2020.7: Superhydrophobic Polymer Surface with Hierarchical Patterns Fabricated in Hot Imprinting Process, International Journal of Precision Engineering and Manufacturing-Green Technology, 2019
| 2019.09.10 | bhkim |
32 |
2015.01: Khac-Ha Nguyen, P. A. Lee, B. H. Kim, "Experimental investigation of ECDM for fabricating micro structures of quartz", International Journal of Precision Engineering and Manufacturing, Vol. 16, Issue 1, pp 5-12, 2015
| 2015.10.07 | prema |
31 |
2008: P. J. Cho, B. H. Kim, D. K. Choi, C. N. Chu, Characteristics of MEDM for Micro-Hole with respect to Circuit Elements, Journal of Mechanical Science and Technology, Vol.22, No.2, pp. 300-307, 2008
| 2013.01.03 | t310 |
30 |
2013.04: Cho, Y. H., Lee, K. Y., Moon, I. Y., Kim, B. H., Park, K., Facile Fabrication of Superhydrophobic Poly(Methyl Methacrylate) Substrates using Ultrasonic Imprinting, Journal of Micromechanics and Microengineering, Vol. 23, 055019, 201
| 2013.04.18 | admin |
29 |
2010: Kim, B. H, et al., Fabrication of Micro Probe-Type Electrodes for Microelectro-Chemical Machining Using Microfabrication, Int. J. Modern Physics B, Vol.24, No.15-16, pp. 2639-2644, 2010
| 2013.01.03 | t310 |
28 |
2005: B. H. Kim, C. W. Na, Y. S. Lee, D. K. Choi, C. N. Chu, Micro Electrochemical Machining of 3D Micro Structure Using Dilute Sulfuric Acid, CIRP Annals - Manufacturing Technology, Vol.54, No.1, pp. 191-194, 2005
| 2012.12.31 | t310 |
27 |
2020.02: An Analytical Model for Grinding Force Prediction in Ultra-Precision Machining of WC with PCD Micro Grinding Tool
| 2020.02.20 | ssborry |
26 |
2013.01: X. D. Cao, B. H. Kim,C. N. Chu, Hybrid Micromachining of Glass Using ECDM and Micro Grinding, International Journal of Precision Engineering and Manufacturing, Vol. 14, No. 1, pp. 5-10, 2013
| 2013.01.03 | t310 |
25 |
2010: S. Kim, B. H. Kim, D. K. Chung, H. S. Shin, C. N. Chu, Hybrid micromachining using a nanosecond pulsed laser and micro EDM, Journal of Micromechanics and Microengineering, Vol.20, No.1, pp. 15037(8pp), 2010
| 2013.01.03 | t310 |
24 |
2016.01: "Micro/nano-hybrid lens for enhancing light extraction using micro-milling and anodic aluminium oxide (AAO)", Journal of Micromechanics and Microengineering, Vol. 26, No. 1, 015010, 2016, doi:10.1088/0960-1317/26/1/015010
| 2015.12.04 | prema |
23 |
2012: B. H. Kim, et al., Wire Electrical Discharge Machining of Carbon Nanofiber Mats for Field Emission, International Journal of Precision Engineering and Manufacturing, Vol.13, No.4, pp. 593-599, 2012
| 2013.01.03 | t310 |
22 |
2017.09: Woo Kyun Kim, Bo Hyun Kim, A molecular dynamics study on atomistic mechanisms of nano-scale cutting process of sapphire, Journal of Mechanical Science and Technology, Vol. 31, No. 9, pp. 4353-4362, 2017.
| 2017.09.12 | bhkim |
21 |
2006: B. J. Park, B. H. Kim, C. N. Chu , The Effects of Tool Electrode Size on Characteristics of Micro Electrochemical Machining, CIRP Annals - Manufacturing Technology, Vol.55, No.1, pp. 197-200, 2006
| 2013.01.03 | t310 |