메뉴 건너뛰기

Domestic Journal 2013, "PCD 공구를 이용한 티타늄 합금의 미세 가공", 한국정밀공학회지, Vol. 30, No. 3, pp. 284-291, 2013

PREMA 2013.04.18 15:33 조회 수 : 505

Moon, I. Y., Kim, B. H., "Micro Machining of Titanium Alloy Using Polycrystalline Diamond Tools," Journal of Korea Society of Precision Engineering, Vol 30, No. 3, 284-291, 2013.

이 게시물을
수정 삭제 목록
번호 제목 날짜 아이디
47 2016.04: Lee, P. A. Kim, B. H.,The effect of pilot-hole in micro EDM drilling, KSMTE Annual Spring Conference, pp. 273, 2016 file 2016.05.23 jsman6589
46 2016.05: Jung, S. M., Lee, P. A., Kim, B. H., "Surface polishing of quartz-based microfluidic channelsusing CO2 laser", Microfluidics and Nanofluidics, Vol. 20, No. 6, 10404-016-1748-8, 2016 file 2016.05.23 jsman6589
45 2016.05: Jung, S. M. Kim, B. H., Micro Grinding of Hard Materials using PCD & PCBN Tools, KSPE Annual Spring Conference, p. 43, 2016 file 2016.05.13 jsman6589
44 2015.04: Kim, S. K., Lee, P. Y., Kim, B. H., Cho, Y. H., Fabrication of Micro Column Array by Micro EDM, KSPE Annual Spring Conference, pp. 29, 2015 file 2016.05.13 jsman6589
43 2015.06: 방전가공용 편심 전극과 그 제조방법 및 이를 포함하는 마이크로 방전가공장치 file 2015.12.15 prema
42 2013.08: 마모율을 이용한 미세공구전극 가공방법 file 2015.12.15 prema
41 2016.01: "Micro/nano-hybrid lens for enhancing light extraction using micro-milling and anodic aluminium oxide (AAO)", Journal of Micromechanics and Microengineering, Vol. 26, No. 1, 015010, 2016, doi:10.1088/0960-1317/26/1/015010 file 2015.12.04 prema
40 2015.12: P. A. Lee, Y. H. Kim, B. H. Kim, "Effect of Low Frequency Vibration on Micro EDM Drilling", International Journal of Precision Engineering and Manufacturing, Vol. 16, No. 13, pp. 2617-2622 file 2015.10.10 prema
39 2015:"Micro structuring of glass by mechanical processes", International Symposium on Green Manufacturing and Applications Program and Proceedings, China, 2015 2015.10.07 prema
38 2015.01: Khac-Ha Nguyen, P. A. Lee, B. H. Kim, "Experimental investigation of ECDM for fabricating micro structures of quartz", International Journal of Precision Engineering and Manufacturing, Vol. 16, Issue 1, pp 5-12, 2015 file 2015.10.07 prema
37 2015.06: D. M. Kim, Vivek Bajpai, B. H. Kim, H. W. Park, "Finite element modeling of hard turning process via a micro-textured tool", International Journal of Advanced Manufacturing Technology, Vol.78, Issue 9, pp 1393-1405, 2015 file 2015.10.07 prema
36 2016.03: D. M. Kim, I. E. Lee, S. K. Kim, B. H. Kim, H. W. Park, "Influence of a micropatterned insert on characteristics of the tool-workpiece interface in a hard turning process", Journal of Materials Processing Technology, Vol. 229, 160- file 2015.10.07 prema
35 2014.10: Micro/nano-hybrid lens for enhancing light extraction using micromilling and anodic aluminum oxide (AAO) file 2015.06.02 admin
34 2014.10 Experimental observation of the hard turning with the micro-patterned insert file 2015.06.02 admin
33 2015.04: Jung, S. M. Kim, B. H.,Lee, P. Y., Polishing of Quartz by CO2 laser, KSMTE Annual Spring Conference, pp. 226, 2015 file 2015.06.01 admin
32 2012: Kim, S. K., Moon, I. Y., Lee, P. A., Kim, B. H., "Micro Tool Fabrication of Polycrystalline Cubic Boron Nitride(PCBN) and its Application," Proceeding of Fall Conference of KSPE, 2012 file 2013.04.18 admin
» 2013, "PCD 공구를 이용한 티타늄 합금의 미세 가공", 한국정밀공학회지, Vol. 30, No. 3, pp. 284-291, 2013 file 2013.04.18 admin
30 2013.04: Cho, Y. H., Lee, K. Y., Moon, I. Y., Kim, B. H., Park, K., Facile Fabrication of Superhydrophobic Poly(Methyl Methacrylate) Substrates using Ultrasonic Imprinting, Journal of Micromechanics and Microengineering, Vol. 23, 055019, 201 file 2013.04.18 admin
29 2013.04: Choi, S. H., Kim, B. H., Shin, H. S., Chung, D. K. and Chu, C. N., "Analysis of the Electrochemical Behaviors of Wc–Co Alloy for Micro ECM," Journal of Materials Processing Technology, Vol. 213, No. 4, pp. 621-630, 2013 file 2013.04.18 admin
28 2013.01: X. D. Cao, B. H. Kim,C. N. Chu, Hybrid Micromachining of Glass Using ECDM and Micro Grinding, International Journal of Precision Engineering and Manufacturing, Vol. 14, No. 1, pp. 5-10, 2013 file 2013.01.03 t310
27 2012: B. H. Kim, et al., Wire Electrical Discharge Machining of Carbon Nanofiber Mats for Field Emission, International Journal of Precision Engineering and Manufacturing, Vol.13, No.4, pp. 593-599, 2012 2013.01.03 t310
26 2011: D. K. Chung, H. S. Shin, B. H. Kim, C. N. Chu, High Frequency Micro Wire EDM for Electrolytic Corrosion Prevention, International Journal of Precision Engineering and Manufacturing, Vol.12, No.6, pp. 1125-1128, 2011 file 2013.01.03 t310
25 2011: D. K. Chung, H. S. Shin, M. S. Park, B. H. Kim, C. N. Chu, Recent Researches in Micro Electrical Machining, International Journal of Precision Engineering and Manufacturing, Vol.12, No.2, pp. 371-380, 2011 file 2013.01.03 t310
24 2010: J. W. Byun, H. S. Shin, M. H. Kwon, B. H. Kim, C. N. Chu, Surface Texturing by Micro ECM for Friction Reduction, International Journal of Precision Engineering and Manufacturing, Vol.11, No.5, pp. 747-753, 2010 2013.01.03 t310
23 2010: Kim, B. H, et al., Fabrication of Micro Probe-Type Electrodes for Microelectro-Chemical Machining Using Microfabrication, Int. J. Modern Physics B, Vol.24, No.15-16, pp. 2639-2644, 2010 2013.01.03 t310
22 2010: H. S. Shin, D. K. Chung, M. S. Park, B. H. Kim, C. N. Chu, Electrochemical Etching of Stainless Steel Through Laser Masking, Journal of Micromechanics and Microengineering, Vol.20, No.5, pp. 55030, 2010 2013.01.03 t310
21 2010: S. Kim, B. H. Kim, D. K. Chung, H. S. Shin, C. N. Chu, Hybrid micromachining using a nanosecond pulsed laser and micro EDM, Journal of Micromechanics and Microengineering, Vol.20, No.1, pp. 15037(8pp), 2010 file 2013.01.03 t310
20 2009: X. D. Cao, B. H. Kim, C. N. Chu, Micro-structuring of glass with features less than 100 μm by electrochemical discharge machining, Precision Engineering, Vol.33, No.44, pp. 459-465, 2009 file 2013.01.03 t310
19 2009: C. H. Jo, B. H. Kim, C. N. Chu, Micro Electrochemical Machining for Complex Internal Micro Features, CIRP Annals - Manufacturing Technology, Vol. 58, No. 1, pp. 181-184, 2009 2013.01.03 t310
18 2009: D. K. Chung, H. S. Shin, B. H. Kim, M. S. Park, C. N. Chu, Surface finishing of micro-EDM holes using deionized water, Journal of Micromechanics and Microengineering, Vol.19, No.4, pp. 045025(7pp), 2009 2013.01.03 t310
17 2008: H. S. Shin, B. H. Kim, C. N. Chu, Analysis of the side gap resulting from micro electrochemical machining with a tungsten wire and ultrashort voltage pulses, Journal of Micromechanics and Microengineering, Vol.18, No.7, pp. 0960-1317, 2008 2013.01.03 t310
16 2008: P. J. Cho, B. H. Kim, D. K. Choi, C. N. Chu, Characteristics of MEDM for Micro-Hole with respect to Circuit Elements, Journal of Mechanical Science and Technology, Vol.22, No.2, pp. 300-307, 2008 2013.01.03 t310
15 2008: J. G. Ok, B. H. Kim, et al., Electrical discharge machining of carbon nanomaterials in air: machining characteristics and the advanced field emission applications, J. of Micromech. Microeng., Vol.18, No.2, p. 025007, 2008 2013.01.03 t310
14 2007: B. H. Kim, J. G. Ok, Y. H. Kim and C. N. Chu, Electrical Discharge Machining of Carbon Nanofiber for Uniform Field Emission, CIRP Annals - Manufacturing Technology, Vol.56, No.1, pp. 233-236, 2007 2013.01.03 t310
13 2007: J. G. Ok, B. H. Kim, W. Y. Sung, C. N. Chu, Y. H. Kim, Uniformity enhancement of carbon nanofiber emitters via Electrical Discharge Machining, Applied Physics Letters, Vol.90, No.3, pp. 33117, 2007 2013.01.03 t310
12 2007: D. K. Chung, B. H. Kim, Chong Nam Chu, Micro Electrical Discharge Milling Using Deionized Water as Dielectric Fluid, Journal of Micromechanics and Microengineering, Vol.17, No.5, pp. 867-874, 2007 2013.01.03 t310
11 2006: B. J. Park, B. H. Kim, C. N. Chu , The Effects of Tool Electrode Size on Characteristics of Micro Electrochemical Machining, CIRP Annals - Manufacturing Technology, Vol.55, No.1, pp. 197-200, 2006 2013.01.03 t310
10 2006: B. H. Kim, B. J. Park, C. N. Chu, Fabrication of multiple electrodes by reverse EDM and the application in micro ECM, Journal of Micromechanics and Microengineering, Vol.16, No.4, pp. 843-850, 2006 file 2013.01.03 t310
9 2012 "Fabrication of micro patterns using poly crystalline diamond shaping tools", International Symposium on Green Manufacturing and Applications, Korea, 2012 2013.01.02 t310
8 2012: "미세 밀링 가공의 원격 조정 및 감시 시스템", The Korean Society of Mechanical Engineers, Korea, 2012 2013.01.02 t310
쓰기 태그