|
20 |
2012: B. H. Kim, et al., Wire Electrical Discharge Machining of Carbon Nanofiber Mats for Field Emission, International Journal of Precision Engineering and Manufacturing, Vol.13, No.4, pp. 593-599, 2012
| 2013.01.03 | t310 |
|
19 |
2011: D. K. Chung, H. S. Shin, M. S. Park, B. H. Kim, C. N. Chu, Recent Researches in Micro Electrical Machining, International Journal of Precision Engineering and Manufacturing, Vol.12, No.2, pp. 371-380, 2011
 | 2013.01.03 | t310 |
|
18 |
2011: D. K. Chung, H. S. Shin, B. H. Kim, C. N. Chu, High Frequency Micro Wire EDM for Electrolytic Corrosion Prevention, International Journal of Precision Engineering and Manufacturing, Vol.12, No.6, pp. 1125-1128, 2011
| 2013.01.03 | t310 |
|
17 |
2010: S. Kim, B. H. Kim, D. K. Chung, H. S. Shin, C. N. Chu, Hybrid micromachining using a nanosecond pulsed laser and micro EDM, Journal of Micromechanics and Microengineering, Vol.20, No.1, pp. 15037(8pp), 2010
| 2013.01.03 | t310 |
|
16 |
2010: Kim, B. H, et al., Fabrication of Micro Probe-Type Electrodes for Microelectro-Chemical Machining Using Microfabrication, Int. J. Modern Physics B, Vol.24, No.15-16, pp. 2639-2644, 2010
| 2013.01.03 | t310 |
|
15 |
2010: J. W. Byun, H. S. Shin, M. H. Kwon, B. H. Kim, C. N. Chu, Surface Texturing by Micro ECM for Friction Reduction, International Journal of Precision Engineering and Manufacturing, Vol.11, No.5, pp. 747-753, 2010
| 2013.01.03 | t310 |
|
14 |
2010: H. S. Shin, D. K. Chung, M. S. Park, B. H. Kim, C. N. Chu, Electrochemical Etching of Stainless Steel Through Laser Masking, Journal of Micromechanics and Microengineering, Vol.20, No.5, pp. 55030, 2010
| 2013.01.03 | t310 |
|
13 |
2009: X. D. Cao, B. H. Kim, C. N. Chu, Micro-structuring of glass with features less than 100 μm by electrochemical discharge machining, Precision Engineering, Vol.33, No.44, pp. 459-465, 2009
| 2013.01.03 | t310 |
|
12 |
2009: D. K. Chung, H. S. Shin, B. H. Kim, M. S. Park, C. N. Chu, Surface finishing of micro-EDM holes using deionized water, Journal of Micromechanics and Microengineering, Vol.19, No.4, pp. 045025(7pp), 2009
| 2013.01.03 | t310 |
|
11 |
2009: C. H. Jo, B. H. Kim, C. N. Chu, Micro Electrochemical Machining for Complex Internal Micro Features, CIRP Annals - Manufacturing Technology, Vol. 58, No. 1, pp. 181-184, 2009
| 2013.01.03 | t310 |
|
10 |
2008: P. J. Cho, B. H. Kim, D. K. Choi, C. N. Chu, Characteristics of MEDM for Micro-Hole with respect to Circuit Elements, Journal of Mechanical Science and Technology, Vol.22, No.2, pp. 300-307, 2008
| 2013.01.03 | t310 |
|
9 |
2008: J. G. Ok, B. H. Kim, et al., Electrical discharge machining of carbon nanomaterials in air: machining characteristics and the advanced field emission applications, J. of Micromech. Microeng., Vol.18, No.2, p. 025007, 2008
| 2013.01.03 | t310 |
|
8 |
2008: H. S. Shin, B. H. Kim, C. N. Chu, Analysis of the side gap resulting from micro electrochemical machining with a tungsten wire and ultrashort voltage pulses, Journal of Micromechanics and Microengineering, Vol.18, No.7, pp. 0960-1317, 2008
| 2013.01.03 | t310 |
|
7 |
2007: J. G. Ok, B. H. Kim, W. Y. Sung, C. N. Chu, Y. H. Kim, Uniformity enhancement of carbon nanofiber emitters via Electrical Discharge Machining, Applied Physics Letters, Vol.90, No.3, pp. 33117, 2007
| 2013.01.03 | t310 |
|
6 |
2007: D. K. Chung, B. H. Kim, Chong Nam Chu, Micro Electrical Discharge Milling Using Deionized Water as Dielectric Fluid, Journal of Micromechanics and Microengineering, Vol.17, No.5, pp. 867-874, 2007
| 2013.01.03 | t310 |
|
5 |
2007: B. H. Kim, J. G. Ok, Y. H. Kim and C. N. Chu, Electrical Discharge Machining of Carbon Nanofiber for Uniform Field Emission, CIRP Annals - Manufacturing Technology, Vol.56, No.1, pp. 233-236, 2007
| 2013.01.03 | t310 |
|
4 |
2006: B. J. Park, B. H. Kim, C. N. Chu , The Effects of Tool Electrode Size on Characteristics of Micro Electrochemical Machining, CIRP Annals - Manufacturing Technology, Vol.55, No.1, pp. 197-200, 2006
| 2013.01.03 | t310 |
|
3 |
2006: B. H. Kim, B. J. Park, C. N. Chu, Fabrication of multiple electrodes by reverse EDM and the application in micro ECM, Journal of Micromechanics and Microengineering, Vol.16, No.4, pp. 843-850, 2006
| 2013.01.03 | t310 |
|
2 |
2005: B. H. Kim, S. H. Ryu, D. K. Choi, C. N. Chu, Micro electrochemical milling, Journal of Micromechanics and Microengineering, Vol.15, No.1, pp. 124-129, 2005
| 2012.12.17 | admin |
|
1 |
2005: B. H. Kim, C. W. Na, Y. S. Lee, D. K. Choi, C. N. Chu, Micro Electrochemical Machining of 3D Micro Structure Using Dilute Sulfuric Acid, CIRP Annals - Manufacturing Technology, Vol.54, No.1, pp. 191-194, 2005
| 2012.12.31 | t310 |
