125 |
2019.05: Na,Y., Kim, B.H., Effect of Tool Edge Radius in Micro Machining of Zirconia, Proceedings of KSPE 2019 Spring Conference. p.150. 2019
| 2019.06.07 | navigo1024 |
124 |
2018.05: Lee,P.A., Na,Y., Kim, B.H., Park, M.S., Choi, Y.H., Prevention of Exit Crack Using a Sacrificial Layer in Micro Drilling of Fused Quartz, KSPE Annual Spring Conference. p.155. 2018
| 2018.05.14 | nayung |
123 |
2018.03: 이평안, 김선길, 김보현, 방전 가공과 마이크로 편심 공구전극을 이용한 미세 기둥 어레이 가공, 한국정밀공학회지, Vol. 35, No. 3, pp. 305-310, 2018
| 2018.04.12 | leepa |
122 |
2018.03 이평안, 남은석, 김보현, 전기화학 미세가공기술의 현황, 한국정밀공학회지, Vol. 35, No. 3, pp. 229-239, 2018
| 2018.04.12 | leepa |
121 |
2008: H. S. Shin, B. H. Kim, C. N. Chu, Analysis of the side gap resulting from micro electrochemical machining with a tungsten wire and ultrashort voltage pulses, Journal of Micromechanics and Microengineering, Vol.18, No.7, pp. 0960-1317, 2008
| 2013.01.03 | t310 |
120 |
2014.10 Experimental observation of the hard turning with the micro-patterned insert
| 2015.06.02 | admin |
119 |
2016.10: Jung, S. M. Kim, B. H., Micro Grinding of STAVAX using PCBN Tools, KSPE Annual Autumn Conference, pp.9, 2016
| 2016.11.02 | jsman6589 |
118 |
2014.10: Micro/nano-hybrid lens for enhancing light extraction using micromilling and anodic aluminum oxide (AAO)
| 2015.06.02 | admin |
117 |
2009: X. D. Cao, B. H. Kim, C. N. Chu, Micro-structuring of glass with features less than 100 μm by electrochemical discharge machining, Precision Engineering, Vol.33, No.44, pp. 459-465, 2009
| 2013.01.03 | t310 |
116 |
2018.10: P. A. Lee, B. H. Kim, Improvement of drilling efficiency in micro drilling of fused silica using EDMed PCD tools, Proceedings of the International Conference of Manufacturing Technology Engineers(2018), 2018
| 2018.10.10 | leepa |
115 |
2018.10: Kim, B.H., Na,Y., Machining Characteristics of Micro Machining of ZrO2 Ceramics, Proceedings of KSPE 2018 Autumn Conference. p.116. 2018
| 2018.11.12 | navigo1024 |
114 |
2019.12: Woo Kyun Kim, Dalei Xi, Bo Hyun Kim, Nanoscale indentation and scratching tests of single crystal sapphire using molecular dynamics simulation, Computational Materials Science, Vol. 170, 109105
| 2019.09.10 | bhkim |
113 |
2022.12: Fabrication of Micro Pin Array Using Eccentric Tools, Ui Seok LEE, Chan Young Yang, Ju Hyeon Lee, Dae Bo Sim, Bo Hyun Kim, International Conference on Precision Engineering (ICPE2022)
| 2023.02.12 | eoqhek |
112 |
2021.02: Rapid manufacturing of large diameter Cu micropillars by micro-electrical discharge machining and focused ion beam
| 2021.03.10 | lus223 |
111 |
2019.03. Jihong Hwang, Young Hak Cho, Min Soo Park, Bo Hyun Kim, Microchannel Fabrication on Glass Materials for Microfluidic Devices, International Journal of Precision Engineering and Manufacturing, Vol. 20, No. 3, pp. 479-495, 2019
| 2019.03.25 | bhkim |
110 |
2022.12: Lee, Pyeong An, Ui Seok Lee, Dae Bo Sim, and Bo Hyun Kim. 2023. "Microfluidic Chip Fabrication of Fused Silica Using Microgrinding" Micromachines 14, no. 1: 96.
| 2023.01.03 | administrator |
109 |
2020.12:You Bin Park, Ui Seok Lee, Chan Young Yang, Bo Hyun Kim, Micro Grinding of Pyrex Glass, KSME online conference, p 305, 2020
| 2021.01.04 | prema |
108 |
2019.07: Fabrication of Micro Pin Array of Graphite Carbon Ui Seok Lee, Yung Na, Pyeong An Lee, Bo Hyun Kim International Symposium on PRecision Engineering and Sustainable Manufacturing (PRESM2019)
| 2019.11.07 | t1654 |
107 |
2016.03: D. M. Kim, I. E. Lee, S. K. Kim, B. H. Kim, H. W. Park, "Influence of a micropatterned insert on characteristics of the tool-workpiece interface in a hard turning process", Journal of Materials Processing Technology, Vol. 229, 160-
| 2015.10.07 | prema |
106 |
2022.10: H. Y. Kim, D. B. Sim, C. Y. Yang, J. H. Lee, B. H. Kim, Effect of Tool Shape on Tool Wear in Micro Grinding of Alumina, 한국정밀공학회 2022년도 추계학술대회 논문집, p149, 산화알루미늄의 미세 연삭에서 공구 형상이 공구 마모에 미치는 영향
| 2022.10.28 | hoyoon2877 |
105 |
2004: B. H. Kim, et al., "Micro Electrochemical Machining of Stainless Steel”, International Conference on Electrical Engineering 2004 (ICEE 2004), Japan, 2004
| 2012.12.28 | admin |
104 |
2017.04: Lee, P. A., Kim, B. H., Chnag, I. G., Oh, K. H., Micro structuring of tungsten carbide alloy using laser machining and EDM, KSMTE Annual Spring Conference, p. 163, 2017
| 2017.05.08 | leepa |
103 |
2020.7: Superhydrophobic Polymer Surface with Hierarchical Patterns Fabricated in Hot Imprinting Process, International Journal of Precision Engineering and Manufacturing-Green Technology, 2019
| 2019.09.10 | bhkim |
102 |
2019.05: U. S. Lee, P. A. Lee, Y. Na, B. H. Kim, Fabrication of Micro Tapered Eccentric Tools, Proceedings of KSPE 2019 Spring Conference. p.151. 2019
| 2019.06.25 | t1654 |
101 |
2015.01: Khac-Ha Nguyen, P. A. Lee, B. H. Kim, "Experimental investigation of ECDM for fabricating micro structures of quartz", International Journal of Precision Engineering and Manufacturing, Vol. 16, Issue 1, pp 5-12, 2015
| 2015.10.07 | prema |
100 |
2011.06: 다결정 다이아몬드를 이용한 미세 공구 제작과 이를 이용한 미세 복합 가공
| 2019.02.11 | bhkim |
99 |
2018.07: P. A. Lee, B. H. Kim, Y. Na, Micro Drilling of Fused Silica and Prevention of Edge Chipping, International Symposium on PRecision Engineering and Sustainable Manufacturing (PRESM2018), 2018
| 2018.07.25 | t1654 |
98 |
2011 "Micro tool fabrication by plate electrode", International conference of asian society for precision engineering and nanotechnology, Hong Kong, 2011
| 2013.01.02 | t310 |
97 |
2019.11: U. S. Lee, Y. Na, B. H. Kim, Y. T. Oh, Machining of carbon mold for micro patterning of glass, KSMTE Annual Autumn Conference, p. 85, 2019
| 2020.07.14 | prema |
96 |
2008: P. J. Cho, B. H. Kim, D. K. Choi, C. N. Chu, Characteristics of MEDM for Micro-Hole with respect to Circuit Elements, Journal of Mechanical Science and Technology, Vol.22, No.2, pp. 300-307, 2008
| 2013.01.03 | t310 |
95 |
2013.04: Cho, Y. H., Lee, K. Y., Moon, I. Y., Kim, B. H., Park, K., Facile Fabrication of Superhydrophobic Poly(Methyl Methacrylate) Substrates using Ultrasonic Imprinting, Journal of Micromechanics and Microengineering, Vol. 23, 055019, 201
| 2013.04.18 | admin |
94 |
2010: Kim, B. H, et al., Fabrication of Micro Probe-Type Electrodes for Microelectro-Chemical Machining Using Microfabrication, Int. J. Modern Physics B, Vol.24, No.15-16, pp. 2639-2644, 2010
| 2013.01.03 | t310 |
93 |
2005: B. H. Kim, C. W. Na, Y. S. Lee, D. K. Choi, C. N. Chu, Micro Electrochemical Machining of 3D Micro Structure Using Dilute Sulfuric Acid, CIRP Annals - Manufacturing Technology, Vol.54, No.1, pp. 191-194, 2005
| 2012.12.31 | t310 |
92 |
2020.02: An Analytical Model for Grinding Force Prediction in Ultra-Precision Machining of WC with PCD Micro Grinding Tool
| 2020.02.20 | ssborry |
91 |
2013.01: X. D. Cao, B. H. Kim,C. N. Chu, Hybrid Micromachining of Glass Using ECDM and Micro Grinding, International Journal of Precision Engineering and Manufacturing, Vol. 14, No. 1, pp. 5-10, 2013
| 2013.01.03 | t310 |
90 |
2010: S. Kim, B. H. Kim, D. K. Chung, H. S. Shin, C. N. Chu, Hybrid micromachining using a nanosecond pulsed laser and micro EDM, Journal of Micromechanics and Microengineering, Vol.20, No.1, pp. 15037(8pp), 2010
| 2013.01.03 | t310 |
89 |
2016.01: "Micro/nano-hybrid lens for enhancing light extraction using micro-milling and anodic aluminium oxide (AAO)", Journal of Micromechanics and Microengineering, Vol. 26, No. 1, 015010, 2016, doi:10.1088/0960-1317/26/1/015010
| 2015.12.04 | prema |
88 |
2020.12: U. S. Lee, U. B. Park, C. Y. Yang, B. H. Kim, Micro drilling of ⌀ 50 μm hole on cemented carbide, KSMTE Annual Autumn Conference, p. 77, 2020
| 2020.12.18 | prema |
87 |
2017.06, P.A. Lee, S. Jung, B. H. Kim, Micro Grinding of Hard Materials using EDMed PCD and PCBN Tools, International Symposium on Green Manufacturing and Applications (ISGMA) 2017, Gyeongju, South Korea
| 2017.06.29 | prema |
86 |
2012: Kim, S. K., Moon, I. Y., Lee, P. A., Kim, B. H., "Micro Tool Fabrication of Polycrystalline Cubic Boron Nitride(PCBN) and its Application," Proceeding of Fall Conference of KSPE, 2012
| 2013.04.18 | admin |